Midcut 3040 Thread cutting Oil – Reaming Oil

Midcut 3040 Thread cutting and Reaming Oil

High lubricity Neat Honing, Reaming, Thread Cutting and Grinding Oil

Midcut 3040 – Available in 208L price £1.32 per litre & 20 litre @ £1.52 per litre

Mid Cut 3040 Data Sheet 

Selection Chart Neat Cutting Oil easy look up Data

Midcut 3040 is a Chlorine free neat cutting oil designed for honing, grinding and cutting of cast iron, steel and sintered / frittage materials. It is also suitable for use on other non ferrous metals such as aluminium, copper, brass and other alloys. It may be used as a general purpose oil for mild steel of low to medium tensile strength

Midcut 3040 is formulated to a low viscosity and contains a high lubricity synthetic ester and anti-mist additives.

Midcut 3040 is recommended for honing, grinding, turning, milling, drilling, thread cutting, and reaming operations

Application & Benefits
  • Honing
  • Turning
  • Drilling and Reaming
  • Milling & Sawing
  • Thread Cutting
  • Very high lubricity
  • Formulated with very high quality mineral oil
  • Chlorine Free
  • Contains anti-mist additives
  • Suitable for cast iron and steel as well as non ferrous such as Aluminium, Copper, Brass and other performance alloys
  • Excellent Stain, corrosion protection for an excellent work piece surface finish

MidCut 3040 – Thread cutting & Reaming Fluid

Characteristics

Typical Data

Characteristics

Typical Data

Appearance

Brown

Esters

Yes

Odour

Little

Specific Gravity (@20oC)

0.82

Viscosity

3 mm 2/s

Loadbearing capacity (kg/mm2)

No Data

Chlorine

No

Sulphur

No

MidCut 3040 Has a shelf life of 3 years. Designed to be used as supplied and is safe to use on most metals.Store sealed in a cool dry place between 5°C and 30°C material should always be stored indoors and protected from extremes of temperature.

Unsure of the correct cutting fluid for the application or material?

WHAT NEAT CUTTING FLUID DO I NEED?