Midcut 3108 – EP ISO 10
Extreme Pressure – EP Neat Cutting, Honing and Grinding Oil for Copper and Aluminium – Low Viscosity ISO 10
Midcut 3108 – Available in 208L price £1.33 per litre & 20 litre @ £1.53 per litre
Midcut 3108 is an extreme pressure low viscosity oil developed for use on steel and non-ferrous alloy metals in a wide range of high pressure and performance machining applications. The product is designed for severe duty general machining and Honing, grinding, deep hole boring, drilling, heavy duty turning, milling and gear manufacturing of ferrous and non ferrous materials.
Midcut 3108 is based on synthetic base oils and advanced synthetic esters combined with high performance sulphur EP and lubricity additives. The product also contains anti-oxidant additives to extend the life of this high performance neat cutting oil.
Midcut 3108 can will give a number of benefits when machining particularly difficult materials e.g. Copper, Brass and Aluminium on sliding head machine tools, (Star, Citizen, Index). Due to the products low viscosity reduced drag out and therefore consumption can be greatly reduced without compromising on machining performance. In addition to those benefits described the machine speeds and feeds can be increased which reduces the time taken to complete production runs – which frees machine time to increase machining capacity. Midcut 3108 can be used for all forms of grinding, is suitable for use as a lubricating oil where a viscosity grade of ISO 10 – 15 is acceptable.
Application & Benefits
- Low Viscosity and Low drag Machining
- High Flash Point
- Low Mist & Low odour
- Multi Metal capabilities
- Auto Machining and Grinding
- Improved tool life and surface finish
- Deep Boring, Drilling, Honing & Heavy Duty Turning
- Synthetic base oil and high performance synthetic ester
- Anti Oxidant additives
- Suitable for steel and non ferrous metals
MidCut 3108 Honing and Grinding Oil
Specific Gravity (@20oC)
10 mm 2/s
Loadbearing capacity (kg/mm2)
MidCut 3108 Has a shelf life of 3 years. Designed to be used as supplied and is safe to use on most metals. It is inhibited to prevent staining of copper based alloys.
Store sealed in a cool dry place between 5°C and 30°C material should always be stored indoors and protected from extremes of temperature.